Close
All Categories
    Filters
    Preferences
    Search

    K-kare™ Disposable ASTM Level 1 Medical Mask, 3-Ply, FDA-Approved, 50 pcs

    $29.99

    Product Features

    • 3-PLY PERSONAL PROTECTION These single-use ASTM Level 1 face masks provide a triple-layer physical barrier for protection from dust, liquid, pollen, pollution, and other airborne particulates, lab-tested at 95 percent BFE (bacteria filtration efficiency) (full report available on request)
    • BREATHABLE AND COMFORTABLE Masks are made of 3 layers of high-quality fabric: Two outer layers repel liquids and filter airborne particulates while the ultra-soft inner layer reduces moisture and heat and moisture for easy breathing
    • PLEATED DESIGN AND ADJUSTABLE FIT One-size fits most adults with soft stretchy earloops and a moldable nose strip for a close fit with no eyeglass fogging
    • SUITABLE FOR DAILY WEAR Constructed of light-weight, skin-friendly nonwoven fabrics with for comfortable all-day wear
    • CONVENIENT AND DISPOSABLE Package includes 50 single use face masks for convenient everyday use
    SKU: PPE-SM50
    Availability: In stock

    Non-irritating face mask for daily protection

    The K-kare™ ASTM Level 1 face mask mask protects the wearer from dust, pollen, droplets, pollution and other airborne particles with 95 percent BFE (bacteria filtration efficiency). These adult-sized masks are made of non-woven breathable breathable fabric, light-weight fabric ear loops, and a moldable plastic nose piece to provide hours of comfortable wear with no eyeglass fogging. Packaged 50 masks/box.

    Three Layers of Filtration

    • First (outer) layer is made of splash-proof hydrophobic non-woven fabric to filter moisture droplets and large particles
    • Second layer is made of high-quality melt blown fabric for filtration of smaller particulates
    • Third (inner) layer is made of soft non-woven fabric that absorbs moisture and is gentle on the skin

    Instructions for use

    Step 1: Wash Hands

    Wash your hands with soap and water or an alcohol-based hand rub and dry completely

    Step 2: Place mask

    Check new mask for damage and then position it with stiff edge (nose  strip) at the top and white side towards you. Holding the mask by earloops, place mask over mouth and nose and slide earloops over ears.

    Step 3: Cover completely

    Pull bottom of mask to fully open and fit under chin. Use the first two fingers of both hands to mold the nosepiece to the bridge of your nose. Try to touch only the outside and edges of the mask to keep it clean. Make sure there are no gaps between your face and the mask.

    Step 4: Remove and Discard

    Without touching the front of the mask, remove earloops and discard safely. Re-use of single-use masks is not recommended. After discarding, wash your hands with soap and water or an alcohol-based hand rub and dry completely.

    Non-irritating face mask for daily protection

    The K-kare™ ASTM Level 1 face mask mask protects the wearer from dust, pollen, droplets, pollution and other airborne particles with 95 percent BFE (bacteria filtration efficiency). These adult-sized masks are made of non-woven breathable breathable fabric, light-weight fabric ear loops, and a moldable plastic nose piece to provide hours of comfortable wear with no eyeglass fogging. Packaged 50 masks/box.

    Three Layers of Filtration

    • First (outer) layer is made of splash-proof hydrophobic non-woven fabric to filter moisture droplets and large particles
    • Second layer is made of high-quality melt blown fabric for filtration of smaller particulates
    • Third (inner) layer is made of soft non-woven fabric that absorbs moisture and is gentle on the skin

    Instructions for use

    Step 1: Wash Hands

    Wash your hands with soap and water or an alcohol-based hand rub and dry completely

    Step 2: Place mask

    Check new mask for damage and then position it with stiff edge (nose  strip) at the top and white side towards you. Holding the mask by earloops, place mask over mouth and nose and slide earloops over ears.

    Step 3: Cover completely

    Pull bottom of mask to fully open and fit under chin. Use the first two fingers of both hands to mold the nosepiece to the bridge of your nose. Try to touch only the outside and edges of the mask to keep it clean. Make sure there are no gaps between your face and the mask.

    Step 4: Remove and Discard

    Without touching the front of the mask, remove earloops and discard safely. Re-use of single-use masks is not recommended. After discarding, wash your hands with soap and water or an alcohol-based hand rub and dry completely.