Close
All Categories
    Filters
    Preferences
    Search
    Brand: K-kare

    K-kare™ Full Face Shield, Made in North America, 10 pcs

    $40.00

    Product Features

    • MADE IN NORTH AMERICA Proudly manufactured at the Koolatron® facility in Brantford, Ontario under MDEL #11781 by members of the United Steelworkers (USW Local 1-500)
    • FULL PROTECTION Wrap-around face shield covers from the top of forehead to below chin to effectively protect the wearer from spray, splatter, droplets, chemicals, dust, oil, and smoke
    • COMFORTABLE AND ADJUSTABLE Solid headband with hook-and-loop fastener can be adjusted to fit while hypoallergenic foam padding absorbs sweat and provides enough room for eyeglasses or safety goggles
    • ANTI-FOG AND ANTI-STATIC Anti-fog and anti-static coatings keep the shield clean and streak-free for maximum visibility even over eyeglasses, goggles, and respiratory masks
    • FULLY TESTED AND APPROVED Conforms to OSHA 20CFR Part 1910.1030 for blood borne pathogens and the CDC’s recommendation for protective eyewear
    SKU: PPE-FS
    Availability: In stock

    Comfortable, long-lasting protection

    The K-kare™ wrap-around face shield provides full coverage to protect the wearer from spray, splatter, saliva, droplets, chemicals, dust, oil and smoke. The durable 0.014-inch thickness PET lens is treated with anti-fog and anti-static coatings to provide you with maximum visibility and clear peripheral vision. Packaged 10/pouch.

    Fully adjustable for secure fit

    Solid headband with hook-and-loop fastener is easily adjustable to fit any head size. Soft foam forehead padding absorbs sweat and provides space to comfortably wear eyeglasses, safety goggles, mask or respiratory mask behind the shield.

    Fully tested and approved

    The K-Kare™ adjustable protective shield is proudly manufactured in North America at Koolatron®’s state-of-the-art facility in Brantford, Ontario by members of the United Steelworkers (USW Local 1-500) and conforms to OSHA 20CFR Part 1910.1030 for blood borne pathogens and the CDC’s recommendation for protective eyewear.

    How to use the face shield

    Step 1: Wash Hands

    Wash your hands with soap and water or an alcohol-based hand rub and dry completely.

    Step 2: Place Shield

    Place foam pad against forehead and adjust headband sides to fit snugly around head. Press hook-and-loop fastener together firmly to secure.

    Step 3: Check fit

    Check that headband is securely fastened and shield completely covers the front and sides of your face. Forehead band should be about 3 cm above eyebrows and bottom of shield below chin level.

    Step 4: Remove and Discard

    Without touching the front of the shield, pull apart hook-and-loop tape and discard safely. Re-use of single-use protective shields is not recommended. After discarding, wash your hands with soap and water or an alcohol-based hand rub and dry completely.

    Products specifications
    MDEL # 11781

    Comfortable, long-lasting protection

    The K-kare™ wrap-around face shield provides full coverage to protect the wearer from spray, splatter, saliva, droplets, chemicals, dust, oil and smoke. The durable 0.014-inch thickness PET lens is treated with anti-fog and anti-static coatings to provide you with maximum visibility and clear peripheral vision. Packaged 10/pouch.

    Fully adjustable for secure fit

    Solid headband with hook-and-loop fastener is easily adjustable to fit any head size. Soft foam forehead padding absorbs sweat and provides space to comfortably wear eyeglasses, safety goggles, mask or respiratory mask behind the shield.

    Fully tested and approved

    The K-Kare™ adjustable protective shield is proudly manufactured in North America at Koolatron®’s state-of-the-art facility in Brantford, Ontario by members of the United Steelworkers (USW Local 1-500) and conforms to OSHA 20CFR Part 1910.1030 for blood borne pathogens and the CDC’s recommendation for protective eyewear.

    How to use the face shield

    Step 1: Wash Hands

    Wash your hands with soap and water or an alcohol-based hand rub and dry completely.

    Step 2: Place Shield

    Place foam pad against forehead and adjust headband sides to fit snugly around head. Press hook-and-loop fastener together firmly to secure.

    Step 3: Check fit

    Check that headband is securely fastened and shield completely covers the front and sides of your face. Forehead band should be about 3 cm above eyebrows and bottom of shield below chin level.

    Step 4: Remove and Discard

    Without touching the front of the shield, pull apart hook-and-loop tape and discard safely. Re-use of single-use protective shields is not recommended. After discarding, wash your hands with soap and water or an alcohol-based hand rub and dry completely.

    Products specifications
    MDEL # 11781